Note: Don’t bother getting a perfect pitch at this time. Step 3: Gradually tighten or loosen the corresponding tuning peg until the A string is close to the correct pitch. Step 2: Starting with the open A string, gently pluck the string to generate a tone. Step 1: Hold the cello in playing position. The A string is considered the first string on a cello, whereas the C string is the fourth string. If more than two strings need tuning, you will use the sequence A, D, G, C, starting with the highest-pitched string and working your way downwards. How you approach tuning the instrument will depend on how many strings need tuning. When tuning a cello, paying attention to the sequencing you use is important. Typically, you tune a cello in an open strings position, that is, without any fingers touching the strings to the board. This is because the cello, like many other stringed instruments, is constructed such that the tension of the strings is what secures the bridge, keeping the soundpost erect. You need to be cautious when adjusting the string tension. Typically, tightening the strings increases the pitch, while loosening the strings lowers the pitch. The general rule of thumb is that minor adjustments are made using the fine tuners, whereas major adjustments where the strings are really off-pitch are made using both the finer tuners and tuning pegs. You can use both the tuning pegs and the fine tuners to change the tension of the strings, in turn changing the pitch of the strings as well. The construction of a cello is such that four tuning pegs are located on the pegbox on the scroll and four fine tuners located on the instrument’s tailpiece. These strings are in order from left to right, thickest to skinniest. As such, C is the lowest while A is the highest. The tuning is C-G-D-A, the notes moving up in pitch order, from low to high. The four strings on a cello are tuned in perfect fifths.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |